Radiant Imaging Labs

Guide

Straighten leaning buildings with Perspective

Make the walls of a building stand upright when you tilted the camera to fit it in.

Draft: not yet checked against the release

Level
Beginner
Time
10 min
Apps
Radiant Raw 1.0Radiant Photo 2.5

When you tilt the camera up to fit a tall building in the frame, its walls lean in toward the top. Perspective straightens those lines, so the building stands upright. In Radiant Raw, Perspective is on the Optics page. In Radiant Photo, use the Vertical and Horizontal sliders in Crop & Straighten.

Make the walls upright in Radiant Raw

  1. Open your photo in Radiant Raw.
  2. Click Optics in the right rail, or press ⌃⌘3 (Ctrl+Shift+3 on Windows).
  3. Under Perspective, choose Vertical. Vertical lines, such as the walls of the building, become upright.
  4. Turn on Constrain crop to trim the empty edges the correction leaves behind.

Tip

Vertical corrects keystone from vertical lines. If the result doesn't look right, try Auto, Level and Full, and keep the one that looks best. Auto keeps the correction small. When the walls lean a lot, it levels the photo instead or leaves it as it was, and the line under the row says why.

To remove the correction, choose Off.

Show Radiant Raw which lines should be straight

To choose the lines yourself, use Guided.

  1. Under Perspective, choose Guided.
  2. Draw lines along edges that should be straight, such as the sides of a building or a door frame.
  3. Turn on Constrain crop to trim the empty edges.

Take full control with Manual Transforms

When you need full control, open Manual Transforms on the same page. It has these sliders:

  • Vertical and Horizontal
  • Rotate
  • Aspect and Scale
  • Offset X and Offset Y

Correct perspective in Radiant Photo

  1. Open the Crop & Straighten page on the right panel, or press C.
  2. Go to Transform.
  3. Drag Vertical to correct lines that lean toward or away from you, such as the walls of a tall building.
  4. If you took the photo at an angle from the side, drag Horizontal too.

Both sliders run from −100 to +100. To remove the correction, set the slider back to 0, its default.

Note

Auto Level can't level a photo that has a Perspective correction, and it tells you so.

What it is What Perspective is and why it matters