Radiant Imaging Labs

Guide

Sharpen for crisp detail without halos

Check focus, sharpen a photo while you watch it at 100%, keep skin and skies smooth, and give the same sharpening to the rest of a shoot.

Draft: not yet checked against the release

Level
Beginner
Time
10 min
Apps
Radiant Raw 1.0Radiant Photo 2.5

Sharpening brings out the fine detail in your photo. Even a photo that's in focus can look a little soft, because of the way a camera's sensor processes it. In this guide you check focus, sharpen while you watch the photo at 100%, keep skin and skies smooth, and give the same sharpening to other photos. Radiant Raw and Radiant Photo each have their own sharpening, so follow the section for the app you're working in.

Check focus first

Both apps have a Focus page that shows which parts of the photo are sharp.

  1. In Radiant Photo, click Focus in the right rail.
  2. Turn on the Focus mask switch, or press ⇧J (Shift+J on Windows). The mask tints every edge that is in focus.
  3. Turn on the Focus points switch, or press ⌥J (Alt+J on Windows). A focus point with no mask inside it means the shot missed focus.

In Radiant Raw, click Focus on the right rail, then click the Focus Peaking header to open the section. Turn on Show focus peaking, or press ⇧J (Shift+J on Windows), to tint the sharp edges in the photo.

Note

In Radiant Photo, the focus mask reads the original preview, so your edits never move it. Sharpening a soft photo won't make the mask say it's in focus. In Radiant Raw, focus peaking is measured on the developed photo, so your develop settings change what it shows.

Sharpen a raw file in Radiant Raw

  1. Click Focus on the right rail, or press ⌃⌘4 (Ctrl+Shift+4 on Windows). The page opens on the Magnifier.
  2. In the Magnifier, choose 100%. Drag the rectangle on the small thumbnail to aim at the detail that matters.
  3. Click the Sharpening header to open the section.
  4. Raise Amount until edges look crisp in the Magnifier.
  5. Keep Radius low for fine detail. It runs from 0.5 to 3.0 and starts at 1.0.
  6. Set Detail for how much fine texture is sharpened, compared with strong edges.
  7. Raise Masking to limit sharpening to edges and keep skin and skies smooth.

The line under the Magnifier's buttons says which control you're adjusting, so you can watch its effect up close.

Tip

The same controls are in the Detail panel on the Edit page (⌃⌘1, Ctrl+Shift+1 on Windows). A change in one place shows in the other.

Sharpen a photo in Radiant Photo

  1. Click Focus in the right rail. The Details section sits under the focus tools, so the Magnifier shows the result at 100% while you work. You can also press D to open the Details panel on the Adjustments page.
  2. Select the Sharpening checkbox, or drag its slider.
  3. Raise Sharpening until the details look crisp. It runs from 0 to 200.
  4. Set Radius. Small values sharpen fine texture such as hair and fabric. Larger values sharpen bigger shapes.

Don't push too far. Strong sharpening can make noise and halos visible.

Tip

Judge sharpening at 100%. Press ⌘1 (Ctrl+1 on Windows) to zoom in, then press Space and hold to see the original.

Keep skin and skies smooth in Radiant Photo

In Radiant Photo, Masking protects smooth areas, so only edges are sharpened. At 0, every area is sharpened.

  1. Hold ⌥ (Alt on Windows) and drag Masking. The photo shows the mask: white areas are sharpened, black areas are protected.
  2. Raise Masking until the skin, sky and other smooth areas you want to protect show black.
  3. Release the mouse button to return to the normal view.

To judge the sharpening without color, hold ⌥ (Alt) while you drag Sharpening. The photo shows in black and white. Radius has no preview.

In Radiant Raw, use Masking in the Sharpening section, as in step 7 above.

Use the same sharpening on other photos

In Radiant Photo, you can copy only your sharpening and leave the rest of each photo's edit alone.

  1. Right-click Copy in the bottom bar. The Copy Settings chooser opens.
  2. Untick every section except Details. Under it, untick Noise removal so only Sharpening stays ticked.
  3. Click Copy to copy with your choices.
  4. Open another photo and click Paste.

To change many photos at once, open your sharpened photo, then ⌘-click (Ctrl-click on Windows) or ⇧-click the other thumbnails and click Sync selected.

Note

Your ticks in the chooser hold until you quit Radiant Photo. They apply to Copy, Paste and Sync, so tick the other sections again before you copy a whole edit.

What it is What Sharpening is and why it matters