Radiant Imaging Labs

The Focus page

Draft: not yet checked against the release

The Focus page answers one question: is the photo sharp where it matters? It brings the Magnifier, your camera's focus points, a sharpness overlay and the sharpening tools together in one place. Click Focus in the right rail to open it.

The page holds, from top to bottom, the Magnifier, Focus points and Focus mask. Scroll down for Details, the same Sharpening and Noise Reduction panel as on the Adjustments page, and Manual Noise Reduction (see Noise Reduction).

ControlWhat it does
MagnifierA fixed view at 50%, 100% or 200%, with a map of the whole frame. See The Magnifier.
Focus pointsDraws the autofocus points your camera used.
Box colorSets the color of the points that were in focus.
Status lineSays how many AF points the photo has, or why there is nothing to draw.
Focus maskTints the parts of the photo that are actually sharp.
StyleOutlines the sharp edges, or fills the whole sharp area.
ChannelsChooses what counts as sharp: edges in focus, fine detail, or both.
SensitivityHigher marks more of the frame as sharp.
ColorSets the mask color.
OpacitySets how strong the tint is.
Dim photoDarkens the photo under the mask, so the mask stands out.
Sharpness scoreRates, out of 100, how sharp the photo's sharpest detail is.

The Focus page is new in Radiant Photo 2.5. Its tools only show you the photo; none of them change it, except Details and Manual Noise Reduction.

Focus points: where the camera focused

Turn on the Focus points switch, press ⌥J (Alt+J on Windows), or choose View > Overlays > Focus Points. Radiant Photo reads the autofocus points from the camera's own data in the file and draws them on the photo.

  • Points that were in focus are drawn in your Box color: Red (default), Yellow, White or Blue.
  • Face, eye and subject boxes keep their own colors, so you can tell them from plain AF points.
  • Points outside your crop are dimmed, not hidden.

The status line under the switch says what the photo has, such as 12 AF points, or why there is nothing to draw. For example: No AF data in this photo, or This camera's AF grid is not mapped yet. Focus points are also hidden while you crop, compare or use Grid view, and the line tells you so.

Did the camera focus on the eye?

On a photo Radiant Flow has scored, Focus points also marks the eye that PRISM found. A small ring sits on the nearer eye of the face your camera's focus point overlaps most. If the focus point is on no face, the ring goes on the first face of the face row: a face with closed eyes if there is one, else the largest face. See Check every face.

  • A solid green ring: the camera's focus point was on the eye.
  • A broken orange ring with a dashed line back to the focus point: it wasn't. Under the status line, the page says AF missed the eye. Hold the pointer over it for what to do: The camera’s AF point sits away from the eye Radiant found. Check the eye at 100%.

The ring tells you where the camera focused, not how sharp the photo is. A photo can still be sharp where the box wasn't. The Magnifier's glass shows the ring too. There's no ring when the photo has no AF data, or when it isn't scored or has no face.

Focus mask: what is actually sharp

Turn on the Focus mask switch, press ⇧J (Shift+J), or choose View > Overlays > Focus Mask (Sharp Areas). The mask tints every edge that is in focus. A focus point with no mask inside it means the shot missed focus.

ControlRange (default)What it does
StyleContours or Fill (Contours)Contours outline the sharp edges; Fill tints the whole sharp area.
ChannelsEdges, Detail or Both (Edges)Edges finds what is in focus; Detail finds what is sharp pixel for pixel.
Sensitivity0 to 1000 (550)Higher marks more of the frame as sharp.
Noise floor0 to 100 (50)Higher keeps grain from being marked when sensitivity is high.
ColorSix chips or Custom color… (White)The mask color. With Both, set Edges color and Detail color separately.
Opacity10 to 100 (40)How strong the tint is.
Dim photo0 to 100 (0)Darkens the photo under the mask, so the mask stands out.

Press ⌥⌘J (Ctrl+Shift+J) to cycle the channels. Defaults puts the style, sensitivity, color and opacity back.

Radiant Photo remembers your Sensitivity for each camera. The line under the slider names the camera, for example Kept for photos from followed by the camera model. Sensitivity uses Radiant's own scale, so its numbers don't match other apps.

Read the numbers

  • Sharpness 82 of 100 rates how sharp the photo's sharpest detail is. It describes the photo, so the sliders never change it.
  • A coverage line says how much of the frame is on a sharp edge, for example 4.2% of the frame is on a sharp edge.

Note

The mask reads the original preview, so your edits never move it. Sharpening a soft photo won't make the mask say it's in focus.

Sharpen while you look

Details sits under the focus tools, so you can sharpen and reduce noise while the Magnifier shows the result at 100%. Its sliders are the same as on the Adjustments page. See Sharpening and Noise Reduction.

Tip

Check focus across a shoot: turn on both overlays with ⌥J and ⇧J, then step through photos with ⌘→ (Ctrl+Right Arrow). A focus box with no mask inside it is a missed shot.

Learn more