Radiant Imaging Labs

Guide

Clean up high-ISO noise

Remove grain and color speckles from a photo shot at high ISO, in Radiant Raw or Radiant Photo, and judge the result at 100%.

Draft: not yet checked against the release

Level
Beginner
Time
10 min
Apps
Radiant Raw 1.0Radiant Photo 2.5

A photo shot at high ISO or with a small sensor can show grain and specks of color. This guide shows you how to clean them up. In Radiant Raw, you do it while you develop the raw file. In Radiant Photo, you do it on the photo you're finishing. In both apps, you start with a simple choice and fine-tune only if you need to.

Zoom in to 100% first

Judge noise at 100%, both before you start and while you work.

  1. Open the photo in Radiant Raw or Radiant Photo.
  2. Press ⌘1 (Ctrl+1 on Windows) to zoom to 100%.

Tip

Both apps have a Focus page that puts a Magnifier above the noise controls, so you can set them while you watch the photo at 100%. In Radiant Raw, click Focus on the right rail, or press ⌃⌘4 (Ctrl+Shift+4 on Windows). In Radiant Photo, click Focus in the right rail.

Start with Light or Strong in Radiant Raw

  1. Click Edit on the right rail, or press ⌃⌘1 (Ctrl+Shift+1 on Windows).
  2. Open the Detail panel and find Noise Reduction.
  3. Choose Light or Strong, and check the result at 100%.

The six sliders below move to show what that strength means. To turn noise reduction off again, choose Off.

Note

The Noise Reduction section on the Focus page holds the same controls. A change in one place shows in the other.

Fine-tune grain and color speckles

Radiant Raw has six sliders for noise. Move any slider, and from then on the sliders hold your own values.

  1. Raise Luminance until the grain looks smooth enough.
  2. If fine texture starts to look soft, raise Detail to protect it.
  3. If smoothed areas look flat, raise Contrast.
  4. Raise Color until the color speckles fade.
  5. Use Color Detail to protect fine color detail, and Color Smoothness to set how far colors blend across an area.

Tip

Color Smoothness is dimmed while Color is 0. Raise Color first.

To go back to the simple choices, click Use basic.

Clean up a photo in Radiant Photo

  1. Open the Details panel (press D).
  2. Select the Noise Reduction checkbox.

That's it for most photos. Different kinds of photos have different kinds of noise, so you can also let Radiant Photo recommend a method for this one:

  1. Click Detailed Scan.
  2. Read the result under the button. It names a recommended method, or says No noise detected.
  3. If it found noise, the recommended method is already selected. To try another, click any method that isn't grayed out.
  4. To remove more or less noise than the method's own setting, move Strength (−30 to +30). Even at 0, the method is already working.

You can also choose a method yourself. Portrait suits people and keeps skin natural. Night Scene suits dark scenes with bright, detailed areas. Camera Phone suits the grainy look of most phone photos.

Important

Strongest gives the maximum amount of noise reduction, but it can soften fine detail. Check the result at 100%.

Tip

At 100%, press Space and hold to see the original. Let go to see your edit again.

Work through a whole shoot

Photos from the same shoot usually need the same develop.

  • In Radiant Raw: get one photo right, then click Sync in the title bar. Choose all photos, the selected photos, or the photos after this one.
  • In Radiant Photo: Noise Reduction checks each photo first and only removes noise it finds. You can leave it on when you batch process a whole shoot, and clean photos stay untouched.

For the full list of controls, ranges and defaults, see Sharpening and Noise Reduction in the Radiant Raw manual and Noise Reduction in the Radiant Photo manual.

What it is What Noise Reduction is and why it matters