Radiant Imaging Labs

Acest manual este deocamdată în engleză. Traducerile urmează după ce engleza este verificată față de lansare.

Black and white

This lesson takes about three minutes. On a photo of a canal lined with painted houses, you turn the photo to black and white, choose how bright the red and orange houses become in gray, add contrast, and compare the result with the color original.

The lesson runs on a sample photo, not on your own photos. Radiant Photo downloads the sample the first time, so you need an internet connection once. When the lesson closes, the sample is put away and your own photo comes back as you left it.

Start the lesson

Open this page in the Help window and start the lesson there, or pick it from the list of tours in Help. In Read & learn you move each control yourself. In Watch & see, Radiant Photo moves the controls for you.

The lesson uses the Profesional Workspace, which is the default. If you have switched to another one, switch back before you start. See Using Workspaces.

What you do

  1. Click Alb-negru in the right panel to open it.
  2. Turn on the Instrumentul Alb-negru. The photo turns to black and white.
  3. The zone chips are families of colors, and Red is selected at first. Set Luminanță to about 80 to make the red and orange houses a lighter gray.
  4. In Ton, set Supercontrast to 30.
  5. The lesson switches to Înainte/După, with the color original beside your black and white.
  6. Click Doar editată to see your black and white alone again.

Sfat

After the lesson, try the other zones on a photo of your own. Click Blue and drag Luminance left to darken a blue sky, the way a red lens filter does on film.

Next