Raw Composite
Raw Composite develops one raw file up to four times and blends the results through masks. Each develop is a pass. Use it when one develop can't suit the whole frame, such as a bright sky over a dark foreground. Develop the sky for the sky and the ground for the ground, and Radiant Raw blends them into one photo.
Raw Composite works on raw files only. On any other photo, Develop > Raw Composite… is unavailable. Point at Raw Composite in the right rail to read Raw Composite works on raw files only.
Raw Composite carries the Lab Tools label, after the title of its window and of the sheet that finds the split. The label means the tool is still being refined. Point at it to read Still being refined. Tell us what you think.
Open Raw Composite
With a raw photo on screen, do one of these:
- Choose Develop > Raw Composite…. It has no shortcut until you set one in Settings > Keyboard Shortcuts.
- Click Raw Composite in the right rail, directly below Edit.
Let Radiant Raw find the split
With Automatic composite on, the default, Radiant Raw first looks for a split on a photo with no composite yet. The sheet reads Finding…, then for example Found: Sky and Foreground. It can find Sky and Foreground or Subject and Background. On other photos it reads No split found and chooses Automatic only. If you've already adjusted the photo's tone, it reads No split found. The develop is already toned, so it is kept as it is. and chooses As it is instead.
- Choose what to build: the split it found, such as Sky and Foreground (auto), Automatic only (the whole photo toned with Automatic, no split) or As it is. The line under the choices says what Build does with the one you chose.
- Click Build. For a split, Radiant Raw tones each part and opens the window. With As it is, the window opens on your develop as it is. With Automatic only, Radiant Raw applies Automatic to the photo on the Edit page, as one undo step, and no window opens: no composite is made. While an export is running, Automatic isn't applied, and Radiant Raw says An export is running. Try again when it finishes.
Cancel closes the sheet and changes nothing.
The sheet and the rail item come with Settings > General > Automatic composite, which starts on. Turn it off, and the window opens straight on your develop.
The Raw Composite window
| Area | What's there |
|---|---|
| Title bar | Undo and Redo, Sync, Discard, Done and Export 1 |
| Left | The Passes list, with Add pass |
| Middle | Your photo, shown as Composite, Solo or Before / After |
| Right | Whole picture, then the selected pass alone: its card, Adjust, Mask and Advanced. The panel is 330 points wide at the Default interface size. |
These keys work in the window. A button's tooltip names its key. To change a key, open Settings > Keyboard Shortcuts. The window's own keys are in the Raw Composite group there.
| Action | Mac | Windows |
|---|---|---|
| Undo / redo your composite changes | ⌘Z / ⇧⌘Z | Ctrl+Z / Ctrl+Y |
| Before / After on or off | ⌥2 | Alt+2 |
| Solo on or off | Not set | Not set |
| Show or hide the mask overlay | O or \ | O or \ |
| Switch the mask overlay between red and gray | ⇧O | Shift+O |
| Make the brush smaller / larger | [ / ] | [ / ] |
| Make the brush's edge softer / harder | ⌥[ / ⌥] | Alt+[ / Alt+] |
| Put away the tool you're using | Esc | Esc |
| See a pass's mask alone, in gray | ⌥-click the pass's card | Alt+click the pass's card |
The brush keys work while you have the brush in hand. The overlay keys work when the overlay can show.
Adjust each part
The right panel shows one pass at a time: the one you select in the Passes list. Its card at the top shows the pass's thumbnail, its mask box and its name. Under the name, it says the pass's place and how much of the photo its mask covers, such as Pass 2 of 2 · covers 34%. A mask that covers only a sliver reads Pass 2 of 2 · covers under 1%. A pass whose mask has no parts yet reads Pass 2 of 2 · covers nothing yet. Until the mask box is drawn, the line reads Pass 2 of 2 · masked. The base pass's card says Base.
- Click the eye on the card to hide or show the pass.
- Click ⋯ (Pass actions) for Rename…, Duplicate, Reset Sky and Remove this pass. The base can't be removed.
- On a pass above the base, Mode and Opacity sit on one line at the foot of the card. The base has neither.
| Control | What it does |
|---|---|
| Mode | How the pass mixes with the passes under it: Normal, Multiply, Screen, Overlay, Soft Light, Luminosity or Color |
| Opacity | How opaque the pass is over the passes under it, after its mask |
| Tone | Brightens or darkens the pass. Right is brighter, on every pass. It runs from 0 to 200: 100 is the pass as set, 0 is two stops darker and 200 two stops brighter. |
| Recovery | Pulls the pass's brightest tones down, from 0 (none) to 100. It lowers Highlights first, then Whites. |
| Color | The pass's saturation |
Tone, Recovery and Color are in the Adjust group under the card. How much a masked pass shows through its mask is Mask amount, in the Mask group (see Build a mask).
Whole picture sits above the card. Its Exposure and Auto Lift work on the photo after the passes are blended. Folded, its head shows both values.
Work with passes
The Passes list on the left shows every pass, whether Advanced is open or not. Open Advanced to see every panel of the selected pass.
- Mask develop is always first. It's a black-and-white develop whose brightness feeds the masks: Feeds the masks. Never blended in. You can change its Black and White Mix, Exposure and Noise Reduction. Its other tone sliders are Kept flat so the mask follows the light. Its card shows its own black-and-white picture.
- The lowest picture pass is the Base. It covers the whole frame, and the other passes are blended over it.
Each picture pass's card shows the pass's picture and, beside it, a small box of its mask. The box is white where the pass shows, black where it doesn't and gray where it fades. Under the name, a chip reads Mask or Whole frame. While the pass's mask has no parts yet, the chip reads Empty: the pass changes nothing in the composite.
Click Add pass and choose One more pass (a copy of the base develop). The menu's other rows replace your passes, and say so: Replace with Automatic composite (a new split, with Automatic composite on) and two starting sets, Replace with Sky and Foreground and Replace with Person, Background and Window. If replacing would remove mask parts you made, such as brush strokes or gradients, Radiant Raw asks first: Remove the mask parts you made? Undo brings them back. A starting set names your passes after its parts and keeps their develops and masks. It adds any part it needs as a copy of the base, and removes passes beyond its parts. A composite holds four passes at most, and the mask develop counts: A composite has up to four passes, counting the mask develop.
On a card in the Passes list, click the name to rename the pass. Click the eye at the card's left edge to hide or show the pass, as in Photoshop's Layers panel. Click × at the right end to Remove this pass. The base and the mask develop stay, and one pass always shows.
Each pass has the Edit page's panels, except HDR. Crop, Perspective, Orientation and Lens Corrections are Shared by all passes: change them once, and every pass follows. Clarity and Sharpening are shared by all the picture passes too.
On a picture pass, Auto in the Tone header works as it does on the Edit page, with the same methods and the same default. It measures that pass alone. A line under the header then says what Auto did. The pass's ▾ has no Contrast only or Contrast and Color rows: the pass uses the choice you made in the Tone ▾ on the Edit page.
On a picture pass, Auto at the end of White Balance's Preset row balances that pass alone, against its neutral areas. A line under the row then says what it did, for example White Balance Auto: 5,600 K, Tint +4 (Neutral areas).
- When the pass has few neutral areas, only part of the cast comes out, because the color may be the light of the scene. The line then reads White Balance Auto: cast partly corrected, 4,800 K, Tint +6 (Neutral areas). Point at it to read why.
- When nothing in the pass is neutral, the pass stays as it was, and the line reads White Balance Auto: left the photo as it was. Point at it to read why.
- When the pass is already balanced, the line reads White Balance Auto: nothing to change.
The line goes away when you change the pass's white balance.
A picture pass's Levels has Output Black and Output White too, under the Black, Mid and White fields. Raise Output Black to lift the pass's darkest tones, or lower Output White to pull its brightest tones down, from 0 to 100. Type a value, or drag a pin on the bar above the two fields. Each change is one undo step. One pair serves every channel, so it shows on the All channels chip only.
Build a mask
The Mask group, under Adjust, builds the selected pass's mask. The base needs none: The base pass covers the whole frame.
- Mask amount, the first row, sets how much the pass shows through its mask, from 0 to 100.
- The part list has one row per part, with a badge for how it combines: + to add, − to subtract, ∩ to intersect. A row shows the part's tool, its name and a short value, such as its amount or how many strokes it has. Click a row to show its settings under the buttons. On a brush or a gradient, the click also makes that tool active again.
- Hold the eye on a row to hide that part while you hold it. Click ⋯ (Part actions), or right-click the row, to change how it combines, to Invert it, or for Duplicate and Remove this part.
- Add, Subtract and Intersect each open the list of tools. The new part combines the way its button says. Their tooltips read Add to mask with…, Subtract from mask with… and Intersect mask with….
After Automatic composite splits the photo, the list starts with Sky coverage or Subject coverage: how much of the frame counts as sky or subject. 50 is the automatic choice.
A warning shows as a small ⚠ in the head of the part it concerns. Hold the pointer over it to read the sentence. In German and other languages with long words, the Add, Subtract and Intersect buttons and some others can show only their symbol, and the word is in the tooltip.
Select by brightness
- Click Add and choose Brightness. It's offered while the mask has no brightness range.
- In Zero point, click Set on photo, then click the photo where the tone you want is, for example the sky. A cross marks that point on the photo, and the line under the rows says 0 is set at the cross on the photo.
- Drag the handles of Range to choose how many stops darker and brighter the mask reaches.
- Soften its ends with Soft low and Soft high. Each goes from 0 to 5 stops, and up to 12 after a Luminosity step.
Or pick a step from the Luminosity menu: Lights 1 to 4, Darks 1 to 4, or Midtones. A step needs no click, and the row reads 0 is white. A step reads the brightness you see in the base pass, not the mask develop's.
Add more parts
Click Add, Subtract or Intersect and choose a tool.
- Linear gradient and Radial gradient work like Radiant Photo's Graduated Filter. Click Set center on the image, then click the photo to place the center. A linear gradient also shows three lines on the photo: where its effect is full, half and gone. A new one is ready to place at once. Drag across the photo from where the effect should be full to where it should end, as in Photoshop. Drag the first or the last line to move it. The sliders follow, and each drag is one undo step.
- Brush: click Paint on the photo and drag. Choose Paint to add to the mask, or Erase to take away from it. Your strokes change the mask that the parts above the brush have made, so you can touch up any edge. Each stroke keeps its own choice. Switching later never changes the strokes you already made. Turn on Snap to edges so strokes follow edges, such as a branch against the sky.
- Color range: click it, then click a color in the photo. Widen or narrow it with the Sample droppers, and soften it with Fuzziness.
- Depth range selects by distance from the camera. It reads the depth map the camera stored in the raw file, so no AI guesses at it. Drag the two handles of Range: the left end of the strip is near the camera, the right end far. Smoothness softens both ends. The note under it reads From the depth the camera stored with this photo. The selection follows Perspective and Lens Corrections. On a photo with no stored depth, the menu line is dimmed and reads No depth stored in this photo
- Person, Sky and Objects find their part on the photo for you. See Select a person, the sky or an object.
- Calculation blends two sources into one mask, like Calculations in Photoshop. For Source 1 and 2, choose a Pass and a Channel, then choose their Blending.
Each part has its own Amount. A brush you add with Add paints or erases, stroke by stroke; one you add with Subtract or Intersect combines that way. The Brightness range, the gradients, Depth range, Person, Sky, Objects and Calculation also have Invert, a symbol in the part's head. Its tooltip reads Invert (swap inside/outside edits).
Select a person, the sky or an object
Person and Sky work like Select Subject and Select Sky in Lightroom Classic. Click Add, Subtract or Intersect and choose one. Radiant Raw looks at the base pass's picture, and the line under the part list reads Finding people… or Finding the sky… Then the part is added, as one undo step. The pass's mask shows on its own for about two seconds, so you see what was found. If Overlay is ticked, the mask already shows. If nothing is found, no part is added and the line says so, such as No sky found in this photo
A Person part also has these rows:
- Which person keeps All people, the default, or one person. Choose Pick on photo, then click the person to keep. The photo reads Click a person on the photo A click beside anyone reads No person there and changes nothing. The picker stays in hand, so another click picks someone else. Esc puts it away. To pick again later, click Pick again. People who touch in the photo count as one person
- Under Parts, Entire person is ticked at first. Tick Body skin, Hair or Clothes to select only those parts. Several ticks select all of them. Ticking Entire person clears the others, and one tick always stays.
- The Hair and Clothes sliders, from 0 to 100%, set how much of the person's hair or clothes the pass takes. At 100%, the default, they're in the mask as found. At 0%, they're left out. If there's none to find, a line says so, such as No hair found.
Objects selects a thing you click, such as an animal or a building:
- Click Add, Subtract or Intersect and choose Objects. The line under the part list reads Click a thing to add it to the mask. Escape cancels.
- Click the thing on the photo. The line reads Finding the object… and then the part is added. Click the sky, and Objects selects the sky.
- Shift-click to add another thing to the same part. A plain click starts the part over from the thing you click.
While the picker is in hand, an Objects toggle shows under the part list. It sets what the next click does. Add puts the thing in the mask. Subtract takes it out, as a separate part, and the line reads Click a thing to take it out of the mask. Escape cancels. Esc puts the picker away. Click the part's row to pick it up again. When a click finds nothing, the line reads Nothing to select there. Try clicking on a thing.
A Person or Objects part has Coverage, which sets how much counts as the part. 50 is the detector's own choice. Snap to edges makes the part's edge follow edges in the photo. A Sky part has no Snap to edges. Its Coverage is grayed out and shows how much of the photo is sky.
Paint with the brush
A ring on the photo shows the brush's size. Strokes build up where they cross and blend into each other, as in Photoshop or Lightroom Classic. A click paints one dab. To paint a straight line, hold ⇧ (Shift on Windows) and click: the line runs from the end of your last stroke. Start a stroke beside the photo to paint right up to its edge. On a trackpad, a two-finger swipe moves the photo and never paints.
| Setting | What it does |
|---|---|
| Size | How big the brush is. [ and ] make it smaller and larger. |
| Softness | How soft its edge is. ⌥[ and ⌥] (Alt on Windows) make it softer and harder. A new brush is fully soft. |
| Flow | How much paint each pass lays down. A new brush starts at 50%, so strokes build up gently. A single click lays its dab at the Flow: 50% at 50%. |
| Density | How far one stroke can build. At 50%, a stroke never covers more than half, however often you go over a spot. Your next stroke can build past it. It starts at 100%. |
These rows sit under the brush in the Mask section, and a right-click on the photo shows them too. Below them, turn on Pressure for Size to paint with a pen: press harder for a wider stroke, up to the Size. A mouse always paints at the Size. Strokes made in an earlier version keep the look they had.
Refine the mask
Under the parts, Refine works on the whole mask. It's folded, and its head reads Defaults until you change something in it. Its rows come in this order: Black point, Midpoint and White point, then Feather, then Shift Edge.
Check your work
- Composite shows the blended photo, and Solo the selected part alone, named over the photo, such as Solo: Sky. Before / After puts the base pass beside the composite.
- While the Mask develop is selected, Solo does nothing, because the mask develop is never blended in. Select it while Solo is on, and the view goes back to Composite.
- Tick Overlay on the Mask group's head line to see where the selected pass applies. The swatch beside it (Overlay color) shows the mask in Red over the photo or as Gray. When the overlay can't show, a ⚠ beside it says why: Shown for a pass above the base, in Composite or Solo. While the pass's mask covers nothing yet, the ⚠ says This pass covers nothing yet. Add a brightness range, gradient, brush or color range.
- To see one pass's mask alone, in Gray, hold ⌥ (Alt on Windows) and click the pass's card in the Passes list, or the thumbnail on the card in the right panel. The card's tooltip reads Option-click to see this pass's mask (on Windows, Alt-click to see this pass's mask). Option-click it again, or click it, and the photo goes back to how it was. This works on a pass above the base whose mask the overlay can show.
Finish or leave
- Done keeps the composite for the photo and goes back to the develop window. On a photo with no composite yet, Done saves none until you change something.
- Discard leaves without your changes. If you changed anything, including the first Build, Radiant Raw asks Discard your changes to this composite? If you synced the composite to other photos, it adds Photos you synced keep their composite.
- Export 1 exports the composite now. You can keep working meanwhile: the canvas says Preview waits for the export and shows your edit when the export ends. If you stop the export, it reads Stopping… until the photo being written is done.
- Esc puts away a tool you're using. With no tool in hand, Esc does what Done does.
Edits that cancel out, such as a slider moved and moved back, count as no change.
When Radiant Photo sent you the photo, the title bar shows Cancel and Open in Radiant Photo instead, and Esc does what Cancel does.
A composite photo in the develop window
The develop window and the filmstrip show the composite. The Edit page shows an Outputs: Raw Composite button at the top. Its tooltip reads This photo's outputs come from its Raw Composite, not from the sliders on this page. Click it to open the composite again.
Export and Edit in Radiant Photo use the composite. The Edit page's sliders don't change it, but Crop & Straighten does. The Whole picture rows at the end of the Edit page change its finish.
To take the composite off, choose Develop > Remove Raw Composite. Your other edits stay, and Edit > Undo puts the composite back.
When another app changed the develop
Another app, such as Radiant Photo, may replace the develop your composite was built on. If it does, the window says This photo's develop changed in another app and waits for you:
- Keep the composite keeps your passes.
- Start from the new develop starts over from the photo's develop now. It asks first, Start over from the new develop?, because Your passes and masks will be removed. Click Start Over to go on.
Until then, the develop window shows and exports the photo's ordinary develop. While the window waits for your answer, you can't change your passes or masks, and Done is off. Esc does what Discard does, or Cancel when another app sent you the photo.
Share a composite
- In the Raw Composite window, click Sync, then choose all other photos or the photos after this one. Radiant Raw says how many photos it reached. On a new composite, Sync stays unavailable until you change something, and the line above your photo says Nothing to share yet: change something in this composite first. If you undo every change, or your changes cancel out, Sync is unavailable again and the same line comes back. This is so even after a Sync.
- Or copy it. In the Copy Settings checklist, a photo with a composite adds a Raw Composite row, ticked. Edit > Copy Settings (⌘C) copies the composite too, with no checklist. Paste gives other photos the composite. It never replaces a composite Radiant Raw can't read, such as one saved by a newer version. That photo still takes the rest of the paste, and the message after the paste says how many composites were left as they were.
Brush strokes and the parts found on the photo, such as Subject, Person, Sky and Objects, are drawn for one photo. So they stay behind unless you tick Composite brush strokes (⌘C uses your last tick). Then they replace the other photo's strokes. When a Subject mask stays behind, Radiant Raw says so. After a Sync, the note reads Subject masks stay on this photo unless Composite brush strokes is on. After a Paste, the message reads Subject masks weren't pasted: copy with Composite brush strokes on to include them.
A Depth range copies with the rest. On a photo with no stored depth, it selects nothing.
Where it's saved
The composite is saved with your other settings, in the .radiant file and in Radiant's part of the .xmp file
next to the photo.
Radiant Photo can't draw a Raw Composite itself. It gets the finished composite from Radiant Raw as a 16-bit TIFF. If that file is gone when Radiant Photo reopens the photo, it says The Raw Composite needs Radiant Raw, so Radiant Photo shows the photo without it.