Spot Removal
Spot Removal paints out dust, specks and thin lines, such as a sensor spot in the sky or a stray wire. Click for a dab or drag for a stroke, and Radiant Photo picks a clean source from your own photo. Press Q, click the Spot Removal tab in the right rail, or choose View > Tools > Spot Removal.

| # | Control | What it does |
|---|---|---|
| 1 | Heal / Clone (under Brush) | The mode for new fixes. |
| 2 | Brush Size | The size of the next fix, from 1 to 100. |
| 3 | Softness | How soft the edge of the next fix is. |
| 4 | Show Pins | When the pins show on the photo. |
| 5 | Spot 1, Spot 2… | One row per fix. Click one to select it. |
| 6 | Radius, Feather, Opacity | Fine-tune the selected fix. |
| 7 | Auto Source | Picks a new clean source for the selected Heal fix. |
| 8 | Clear Spot Removal | Removes every fix on this photo. |
Opening the page turns the tool on. Press Esc to put it away.
Remove a spot
- Set Brush Size so the round brush covers the spot.
- Click the spot. Radiant Photo places a dab and picks a clean source for it.
To remove a longer defect, drag along it. The whole stroke is one fix, marked Stroke in the list. For a straight line, hold Shift and drag. To add a straight segment to the last fix, Shift-click where it should end.
Each dab, stroke or segment is one Undo step. A photo holds up to 512 fixes.
Size and soften the brush
| Control | Range (default) | Keys |
|---|---|---|
| Brush Size | 1 to 100 (66) | ] larger, [ smaller, or ⇧ with the scroll wheel (Shift on Windows) |
| Softness | 0% to 100% (25%) | ⌥[ softer, ⌥] harder (Alt on Windows) |
Each key press shows the new value on the canvas. Radiant Photo remembers both for next time.
Softness fades outward from the edge of the brush, so everything inside the circle is fully fixed. The brush shows a solid ring where full strength ends, and a fainter ring where the fade ends. Feather works the same way on a placed fix.
Opacity sets how strongly new fixes cover the photo. With a pen, turn on Pressure for Opacity: the harder you press, the stronger each new fix, up to that Opacity.
To change how hard you must press to reach that Opacity, open Settings > Tools and set Pen pressure. With Soft, a lighter press is enough. Normal is the default. With Firm, only a firm press paints at full Opacity. Your next fix uses the new setting.
With a pen, turn on Pressure for Size: the harder you press, the wider the stroke at that point, up to the Brush Size. A mouse always paints at the Brush Size.
Heal or Clone
- Heal blends the source texture into the spot. It's the default, and the best choice for most dust.
- Clone copies the source pixels straight over the spot, for an exact copy. Clone copies only from a source you set, so ⌥-click the good pixels first (Alt-click on Windows). Without one, a Clone stroke places nothing.
The choice under Brush applies to new fixes. To change one fix, select it and use its own Heal and Clone switch.
Both modes copy the photo with your earlier fixes in it.
Choose a Blend Mode
Blend Mode sets how a fix is laid over the photo. The menu under Brush sets it for new fixes, and a selected fix has its own.
- Normal: the fix as it is (the default).
- Lighten: changes only pixels darker than the fix, for dark dust on a light sky.
- Darken: changes only pixels lighter than the fix, for a light speck on a dark sky.
- Replace (Heal only): lays the source down without matching the tone around it, so its grain stays unchanged.
Diffusion (1 to 7, default 1) smooths a Heal fix's source first: low keeps the grain, high suits smooth areas such as sky. It works only on fixes painted from a source you set yourself, with ⌥-click (Alt-click on Windows). Until you set one, the slider stays at 1 with Only on spots painted from a source you set under it. A fix that started with an automatic source stays at 1, even if you move its source later. Clone and Replace ignore it. Like Blend Mode, it's under Brush for new fixes, and a selected fix has its own.
Set the source yourself
- ⌥-click the photo where the good pixels are (Alt-click on Windows). A crosshair marks the source, and the panel shows Source set.
- Paint the defect. The source keeps the same distance from the brush as you paint more fixes.
- ⌥-click again to choose a new source, or click Clear Source. Heal goes back to automatic sources, and Clone needs a new source before it places anything.
In Clone with no source set, the panel reminds you: Option-click the photo to set a source (Alt-click the photo to set a source on Windows). A fix made this way shows Source set by hand.
With a pen or a finger, use Set Source instead. It's under the Heal and Clone switch, in Brush. Click it, then click or tap the photo where the good pixels are. While it waits, the button is highlighted and the panel reads Click or tap the photo to set a source. That click or tap only sets the source: it paints nothing. To stop waiting, click Set Source again or press Esc.
Turn off Aligned and every stroke starts from the source you set, so you can stamp the same pixels in several places.
Line up the source
With a source set, hold ⌥⇧ (Alt+Shift on Windows) to see its pixels inside the brush ring, and drag to line them up. In the Source Overlay menu, Blend Mode sets how they mix with the photo. Difference turns them black where the source lines up. Turn off Show Crosshair to hide the source's crosshair.
Turn, scale or flip the source
In Clone mode, the Source group under Brush changes what the next strokes copy, for example to continue a curved edge. Rotation turns it (hold ⌥⇧ and press the comma or period key), Scale sizes it (⌥⇧] and ⌥⇧[), and Flip horizontal and Flip vertical mirror it. On Windows, use Alt+Shift for ⌥⇧. A selected Clone fix has its own Source group.
Edit a fix
Click a fix's pin on the photo, or its row in the panel, to select it. Its source appears as a dashed circle (2) joined to the fix (1) by a line (3).
- Drag the fix's pin or the source's pin to move it.
- Drag the edge of a dab's ring (4) to resize it.
- Adjust Radius, Feather and Opacity (0% to 100%, default 100%).
- Click Auto Source to pick a clean source again for a Heal fix. For a Clone fix, drag its source's pin instead.
Delete fixes
- ⌥-drag a box around fixes (Alt-drag on Windows). The fixes inside turn red, and letting go deletes them in one Undo step.
- Select a fix and press Delete (Delete or Backspace on Windows).
- Click the × at the end of its row (Delete Spot 1).
- Click Clear Spot Removal to remove every fix in one Undo step.
Show or hide the pins
Show Pins sets when pins appear. Auto shows them while you point at the photo or work on a fix. The other choices are Always, Selected (only the selected fix) and Never. Press ⇧H (Shift+H on Windows) to step through them.
See dust with Visualize Spots
Visualize Spots shows the photo as a high-contrast gray view, so dust and small specks stand out. It's a view only: it changes nothing in your photo, and you still remove each spot yourself.
- Zoom to 100% or closer. The view needs a close zoom to show.
- Press A, or select Visualize Spots under Visualize in the panel.
- Paint out the spots you see. The brush works as usual while the view is on.
- Press A again to see your photo.
Strength, under the checkbox, sets how strongly specks stand out, from 1 to 100 (default 100). Lower it to soften the view. Radiant Photo keeps your Strength until you quit.
The view shows only in Edited Only. Before/After and Split hide it until you switch back. Putting the tool away turns the view off. While the tool is put away, the checkbox is unavailable and its tooltip reads Open Spot Removal to visualize spots.
Find dust
Radiant Photo can look for sensor dust and list the spots it finds. It only suggests them: nothing changes in your photo until you fix a spot.
- Under Dust, below the list of fixes, click Find Dust in This Photo. To stop the search, click Stop.
- Each spot found gets a row, Possible dust 1, and a dashed ring on the photo. Point at a row to highlight its ring.
- Answer each row. Click the check mark (Fix) to heal the spot, or the × (Turn Down) to leave it as it is.
A fixed spot becomes a Heal fix in the list above, with an automatic source, full Opacity and your brush's Softness. Edit or delete it like any other fix. If you undo or delete it, its row waits for your answer again. A row you turned down reads Turned down. Click its arrow (Undo Turn Down) to answer again.
If the search finds nothing, the panel reads No dust found in this photo. Searching again replaces the list, but spots you turned down stay turned down. The list isn't saved: closing the photo clears it. The fixes you made stay.
Radiant Photo looks for small, soft, dark spots on smooth areas such as sky. It skips spots on busy texture such as foliage, and it skips lines, edges and colored dots. It can miss dust, so check the photo yourself too, for example with Visualize Spots.
Find the same dust in all open photos
Dust on your camera's sensor shows in the same place in photo after photo. With two or more photos open, click Find Dust in All Open Photos. The panel counts the photos as it goes, for example Looking for dust: 3 of 9 photos.
Each photo then lists only spots found in the same place in at least two photos of the same shape and orientation. Under each row, In 7 of 9 photos says how many. Your answers apply to one photo only, so answer the rows in each photo.
Work from the keyboard
| Action | Mac | Windows |
|---|---|---|
| Open Spot Removal | Q | Q |
| Move the reticle or a shown source | Arrow keys (⇧ for 10) | Arrow keys (Shift for 10) |
| Move the whole fix | ⌥+arrow | Alt+arrow |
| Paint a dab at the reticle | Return | Enter |
| Set the source at the reticle | ⌘Return | Ctrl+Enter |
| Stop Set Source waiting, hide the source, then put the tool away | Esc | Esc |
| Turn Visualize Spots on or off | A | A |
Change these keys in Settings > Keyboard Shortcuts.
Copy fixes to other photos
In Copy Settings…, select Spot Removal (it starts unchecked), then paste on another photo. With Add, the default, the fixes join that photo's own. Replace removes its own fixes first. Automatic sources are picked again on each photo, and sources you set by hand are kept.
Note
If Radiant Raw later changes a photo's framing, Radiant Photo moves your fixes with the content and removes any that fall outside it.