Using Radiant Photo with Lightroom Classic
The Radiant Photo plug-in sends photos from Lightroom Classic to Radiant Photo and brings each result back into your catalog. You can edit in Radiant Photo's full editor, or let it give a whole selection the Perfect Look while you keep working in Lightroom Classic.
Before you start
- Radiant Photo, installed, activated and opened once on this computer. You don't need to open it again before each command.
- Lightroom Classic on the same computer. Quit it while you install Radiant Photo.
- The Radiant Photo installer adds the plug-in to Lightroom Classic's Modules folder: for every account on a Mac, and for the installing account on Windows.
To check the plug-in, choose File > Plug-in Manager… in Lightroom Classic and select Radiant Photo. Its status reads Ready when everything is in place.
Where your photos open
Photos you send to Radiant Photo from Lightroom Classic open in Radiant Photo Host, a separate app that comes with Radiant Photo. It has its own window and its own icon in the Dock (the taskbar on Windows). A job never interrupts what you're doing in Radiant Photo.
- The Host starts by itself when a command sends it photos. After 10 minutes with nothing to do, it quits.
- The editor, the batch panel and the Dock icon on this page are the Host's. The batch panel's button reads Open in Radiant Photo Host.
- In Settings, the choice to quit after each job reads Quit Radiant Photo Host after each Lightroom Classic job, in Radiant Photo and in the Host.
- Open in Radiant Photo, on the bar under the photo, opens the current photo in Radiant Photo as an ordinary photo. The job stays in the Host.
See Radiant Photo Host.
The commands
Select one or more photos, then choose a command from File > Plug-in Extras. In the Library module, the same commands are also under Library > Plug-in Extras.
| Command | What it does |
|---|---|
| Edit in Radiant Photo… | Opens the photos in the editor. You edit, then click Done. |
| Edit in Radiant Raw… | Opens the original raw file of each photo in Radiant Raw. Each photo you develop there comes back stacked above its original, as TIFF (16-bit) or DNG, your choice. Needs Radiant Raw, installed and activated. |
| Radiant Photo: Quick Look… | Opens the photos in a small Quick Look window instead of the full editor: you pick one Look and its strength. |
| Radiant Photo: Apply Perfect Look | Gives each photo the recipe for its own scene. No dialog. |
| Radiant Photo: Apply Perfect Look (last settings) | Runs your last Batch… choice again, with no dialog. |
| Radiant Photo: Batch… | Sends every photo with one correction you choose. |
| Radiant Photo: Convert RAW to Linear DNG | Makes a Linear DNG of each camera raw with Adobe's free DNG Converter. Radiant Photo isn't used. |
You can also choose File > Export… and set Export To to Radiant Photo. Two presets, Apply Perfect Look and Edit in Radiant Photo, are under File > Export with Preset > Radiant Photo.
Radiant Photo also works inside any Lightroom Classic export, as a post-process action, and as a publish service that keeps a folder up to date. Both are described below.
Edit in Radiant Photo
- Select the photos and choose Edit in Radiant Photo…. Lightroom Classic renders each one with your Lightroom Classic edits and opens it in the editor.
- Edit as usual. A bar under the photo shows Cancel and Done with the number of photos still open.
- Click Done to send every photo still open back to Lightroom Classic, crop included. Click Cancel to send none back.
Photos open with their Perfect Look, as any photo does. A photo already open in Radiant Photo on its own is refused: close it there first.
Quick Look
Radiant Photo: Quick Look… shows the photo's Before and After side by side, with a panel under them.
- Choose a Look in the panel's Look row. A photo with no Look of its own starts on the Look you last applied in Quick Look.
- Set its Strength.
- Click Apply (with several photos, it shows how many). Every photo gets that Look at that strength and goes back to Lightroom Classic, as from Edit in Radiant Photo…. Cancel sends none back.
To do more, click More Edits in Radiant Photo. The same photos open in the full editor.
Edit a result again
Choose Edit in Radiant Photo… or Radiant Photo: Quick Look… on a photo that came back from either one. The plug-in asks Reopen the previous Radiant Photo settings? When several of the photos are results, it says how many.
- Reopen Previous Settings, the default, goes back to the photo the result was made from. Lightroom Classic renders that original again, with its Lightroom Classic edits, and Radiant Photo opens it on your earlier settings. You pick up where you left off, and the photo comes back as a new result.
- Start Over edits the result as it is now, as a new edit.
- Cancel sends nothing.
If a result's original is gone from the catalog, or its file is missing, the dialog says so. That photo opens as a new edit. If Radiant Photo can't find the earlier settings, it also edits the photo as a new edit, and the closing message lists it under Notes from Radiant Photo:.
Photos that came back from Radiant Photo: Batch…, Radiant Photo: Apply Perfect Look or Radiant Photo: Apply Perfect Look (last settings) always open as new edits. Results of Export To: Radiant Photo in its Edit mode can be reopened too.
Batch processing
Radiant Photo: Batch… opens the Radiant Photo Batch dialog. Under Correction, choose:
| Choice | What each photo gets |
|---|---|
| Perfect Look: each photo gets the Recipe of its own scene | The default. |
| One Recipe for every photo: | The recipe you pick, or type as Collection: Setting. |
| A Look over each photo's Perfect Look: | Its own Perfect Look, then the Look you pick on top. |
| A suggested Look for each photo, to check in Radiant Photo first | Its own Perfect Look, then the Look Radiant Photo suggests for it, once you've checked it. |
With choice 4, Radiant Photo finds a Look for each photo first. The batch panel then shows every photo under Check each photo's Look. A Look Radiant Photo picked reads Suggested. Change any photo's Look, or choose No Look. Nothing is edited until you click Accept All. A Look marked Not owned isn't one you own on this computer, so a photo given it isn't edited.
Select Send the untouched originals, without their Lightroom Classic edits to start from the original files. Click Start. Lightroom Classic remembers your choice for Apply Perfect Look (last settings).
What comes back
- A new 16-bit ProPhoto RGB TIFF beside the original, named
name-Radiant.tif(then-Radiant-2,-3). Your original never changes. - Stacked above its original, and gathered in a new collection inside a Radiant Photo collection set.
- The original's keywords, title, caption, creator, copyright, GPS location with its altitude and direction, color label, star rating, and its pick or reject flag. From Edit in Radiant Photo…, a rating, label or pick you set or clear in Radiant Photo wins. A photo you reject there comes back with no stars and no flag.
- Four read-only fields in the Metadata panel: Radiant Photo setting, Radiant Photo plug-in, Radiant Photo Look and Radiant Photo version.
One closing message lists any photo that didn't come back, with the reason. A failed photo never stops the others.
Watch a batch
Batches run without opening the editor. Choose how much you see in Settings > General, under Lightroom Classic > During Lightroom Classic batches:
| Choice | What you see |
|---|---|
| Compact panel (default) | Lightroom Classic stays in front. A small panel shows the batch. |
| Full editor | The editor comes to the front and shows the batch with Cancel. |
| Dock only (Mac) / Taskbar only (Windows) | No panel. The count shows on the app's icon. |
| # | Compact panel control | What it does |
|---|---|---|
| 1 | Header buttons | Show finished photos, Make the panel one line, or hide the panel while the batch runs. |
| 2 | Thumbnail | The last photo back, as a before and after. |
| 3 | Pause / Resume | Finishes the current photo, then waits. |
| 4 | Count and time left | Photos back, of the total, and about how long is left. |
| 5 | Open button | Brings the app's window to the front. At the end, Show in Lightroom Classic takes you back. |
You can also pause or cancel from the app's Dock icon menu (its taskbar button on Windows).
The app can also quit after each Edit in Radiant Photo… or Radiant Photo: Quick Look… job. Turn this on in Settings > General, under Lightroom Classic. It's off by default. Batches never quit the app.
Radiant Photo inside any export
Add Radiant Photo to an ordinary Lightroom Classic export. You keep the export's own folder, file names, size, sharpening and watermark.
- Choose File > Export… and set up the export as usual. Under File Settings, choose JPEG or TIFF.
- In the left column, under Post-Process Actions, select Radiant Photo and click Insert.
- In the Radiant Photo section that appears, choose Perfect Look: each photo gets the Recipe of its own scene, or A Look over each photo's Perfect Look: with a Look and its Amount: (0 to 100, 75 to start).
- Export as usual.
Lightroom Classic renders each photo, and Radiant Photo writes the file your export asks for: its format, color space and size, and its JPEG quality and Limit File Size To, or its TIFF bit depth and compression. A JPEG is compressed only once. A file already in the folder is handled as the export's Existing Files choice says. Nothing is stacked or added to a collection, and no batch panel opens.
A JPEG or an 8-bit TIFF is never written in ProPhoto RGB. If the export asks for ProPhoto RGB, Radiant Photo writes that file in Adobe RGB (1998).
An export in another format, such as PSD, DNG or PNG, goes out without Radiant Photo, and the export's report says so for each photo. Save the export as a preset to keep the section's choices.
Publish to a folder
The Radiant Photo publish service keeps a folder of finished photos up to date with your catalog.
- In the Library module, find Radiant Photo in the Publish Services panel and click Set Up….
- In its Radiant Photo section, set Publish to folder: (Choose… picks one). It starts as Radiant Photo Published in your Pictures folder.
- Set Format: to JPEG, with a Quality: from 1 to 100 (90 to start), or to TIFF (16-bit). Set Color space: to sRGB (the default), Adobe RGB (1998) or ProPhoto RGB. A JPEG set to ProPhoto RGB is written in Adobe RGB (1998).
- Choose the Perfect Look, or a Look over it with its Amount:, as for an export. Save the service.
- Drag photos onto its Radiant Photo collection, then click Publish.
Each published collection gets a folder of its own, named after it, inside the publish folder. Each photo is
published at full size, as name.jpg or name.tif (name-2 when that name is taken).
When you change a published photo, Lightroom Classic lists it under Modified Photos to Re-Publish. Publish writes its file again, in place. Removing a photo from a published collection never deletes its file. To find a file, right-click the photo and choose Show in Finder (Show in Explorer on Windows). To change the settings, right-click the service and choose Edit Settings.
Prepare raw files in Lightroom Classic
Keep Lightroom Classic's work to the raw-only steps: lens corrections, cropping, and rescuing bad exposure. Skip Auto, Vibrance, Saturation, Clarity and Dehaze, and let Radiant Photo handle color and tone.
If something goes wrong
| You see | Do this |
|---|---|
| Radiant Photo did not pick up the job… | Open Radiant Photo, then try again. Install the current Radiant Photo if it still fails. |
| Radiant Photo is not activated on this computer… | Open Radiant Photo and activate it. |
| Radiant Photo and this plug-in do not match… | Quit Lightroom Classic and install the current Radiant Photo. |
| macOS did not let Radiant Photo Host write into the folder… (Mac) | Open System Settings > Privacy & Security > Full Disk Access and turn on Radiant Photo Host. If it isn't listed, click +, press ⇧⌘G, enter /Applications/Radiant Imaging Labs/Radiant Photo.app/Contents/Helpers and choose Radiant Photo Host. Then send the photos again. The Host has its own entry, apart from Radiant Photo. |
| Radiant Raw is not installed or not activated on this computer… | Install Radiant Raw, open it once and activate it, then try again. |
| Select one or more RAW photos, then try again. | Select at least one raw photo whose original file is on a connected drive. JPEG, TIFF and video files don't go to Radiant Raw. |