Radiant Imaging Labs

Using Radiant Photo with Capture One

Draft: not yet checked against the release

The Radiant Photo plug-in adds Radiant Photo to Capture One's Image > Edit With menu. You edit one or many variants in Radiant Photo Host, and each edit comes back into Capture One as a new variant. It works on Mac and on Windows.

The same menu also lists Radiant Photo Quick Look, for one Look and its strength. Under File > Publish, the plug-in adds Radiant Photo, which saves finished files to a folder.

These jobs run in Radiant Photo Host, a separate app that comes with Radiant Photo, so a job from Capture One never interrupts what you're doing in Radiant Photo. The Host starts by itself and uses Radiant Photo's Looks, recipes and activation. The plug-in's own messages still say Radiant Photo.

Before you start

  • Radiant Photo, installed and activated on this computer.
  • Capture One on the same computer. Radiant Photo is tested with Capture One 16.9. Quit Capture One while you install Radiant Photo: Capture One reads its plug-ins when it starts.
  • The Radiant Photo installer adds the plug-in to Capture One for your user account.
  • On a Mac, Full Disk Access for Radiant Photo Host as well as for Radiant Photo. The Host writes the edited files into your photos' folders, and it has its own entry in the list. See Full Disk Access.

Edit in Radiant Photo

  1. In Capture One, select one or more variants.
  2. Choose Image > Edit With > Radiant Photo.
  3. Capture One shows the plug-in's recipe. Keep its settings and start the edit. Capture One renders each variant with your adjustments and crop.
  4. Radiant Photo Host opens with every variant. A bar under the photo shows Cancel and Done with the number of photos still open.
  5. Edit as usual. Click Done to send every photo still open back to Capture One. Click Cancel to send none back.

While you edit, Capture One shows the job's progress, for example Editing in Radiant Photo (1 of 2).

To go on with a photo in the full Radiant Photo, click Open in Radiant Photo at the left of the bar. The job stays in the Host. See Open a photo in Radiant Photo.

Quick Look

Radiant Photo Quick Look gives your variants one Look, without the full editor. It works the same on Mac and on Windows.

  1. In Capture One, select one or more variants and choose Image > Edit With > Radiant Photo Quick Look.
  2. Keep the recipe's settings and start the edit, as for Radiant Photo.
  3. Radiant Photo Host shows the photo's Before and After side by side, with a panel under them. Choose a Look in the panel's Look row, and set its Strength.
  4. Click Apply (with several photos, it shows how many). Every photo gets that Look at that strength and comes back to Capture One as a new variant. Cancel sends none back.

To do more, click More Edits in Radiant Photo. The same photos open in the Host's full editor, with the Cancel and Done bar.

Edit in Radiant Raw

When the variants you select include a raw photo, Image > Edit With also lists Radiant Raw. It sends each photo's original raw file to Radiant Raw, not a copy made by Capture One. You develop the photos in Radiant Raw, and each one comes back to Capture One as a new variant.

You need Radiant Photo on this computer, since its installer adds the plug-in to Capture One. You also need Radiant Raw, installed, activated and opened once.

  1. In Capture One, select one or more raw photos. Only raw files go. On a Mac, a JPEG or TIFF in the selection stays behind. On Windows, the plug-in looks in the photo's folder for a raw file of the same name, so a selected IMG_0001.JPG or IMG_0001-Radiant.tif, selected with a raw photo, sends IMG_0001.CR3 when it's there.
  2. Choose Image > Edit With > Radiant Raw.
  3. Capture One shows the plug-in's recipe. Keep its settings and start the edit. The plug-in asks for a JPEG there, the quickest file to make, and doesn't use it: it sends the raw file itself.
  4. Radiant Raw opens with the photos. Capture One shows Waiting for Radiant Raw: press Done there to bring the photos back.
  5. Develop the photos. Click Done to bring every photo back to Capture One. Click Cancel to bring none back. Quitting Radiant Raw counts as Cancel.

Each photo comes back as a 16-bit TIFF, saved beside its raw file and named after it: IMG_0001.CR3 comes back as IMG_0001-Radiant.tif. If that file is already there from an earlier edit, the new one is IMG_0001-Radiant-2.tif. Two variants of one raw file send it once, so one TIFF comes back. Capture One adds the TIFF as a new variant beside the original. It isn't stacked with it, and there's no DNG choice, as there is in Lightroom Classic. Your raw file doesn't change. Radiant Raw also saves your settings beside it, in IMG_0001.CR3.radiant. See Where your settings are saved in the Radiant Raw manual.

On a Mac, when the photos come from more than one folder, Capture One asks before it adds them: One or more of the edited images were not saved in the expected location. Choose Reference image(s) at current location to keep each TIFF beside its raw file. Do not import images leaves them out, and Move images into catalog moves them away from their raw files. To skip the question, send photos from one folder at a time.

To change the end of the name, set Name suffix in the plug-in's own Radiant Raw tab, in the same dialog. On a Mac, it's kept for next time.

If you stop the job in Capture One before you click Done, Radiant Raw still saves the photos you finish beside their raw files, but Capture One doesn't add them. Import them yourself.

  • On a Mac, keep the photos selected until Radiant Raw opens: the plug-in asks Capture One which photos are selected. A photo you deselect in the meantime stays behind, and with none selected, nothing is sent.
  • On Windows, the plug-in finds each raw file by its name in the photo's folder. Send photos from one folder at a time. A raw file that shares its name with another in that folder, such as IMG_0001.CR3 and IMG_0001.DNG, stays behind.

The recipe

For Radiant Photo, the plug-in sets these defaults. Capture One remembers any change you make for next time.

SettingDefault
FormatTIFF, the only choice
Bit depth16-bit
CompressionNone
ICC profileAdobe RGB (1998)
SharpeningOutput sharpening off
CropYour crop is applied
MetadataKeywords, rating, copyright, camera data, GPS location and the rest are included

What comes back

For Radiant Photo:

  • A new TIFF for each photo you finish, in the recipe's bit depth and color profile: 16-bit Adobe RGB (1998) unless you changed them. An 8-bit TIFF is never in ProPhoto RGB. If the recipe asks for that, the TIFF comes back in Adobe RGB (1998). Capture One adds it as a new variant beside the original.
  • Your original variant and its adjustments don't change.
  • When you click Cancel, nothing comes back.

Reopen Previous Settings starts from the render made at the first edit, so later changes to the original in Capture One aren't picked up.

Publish to a folder

File > Publish > Radiant Photo gives each variant its own Perfect Look, or on a Mac a Look you check first, and saves the result in a folder. Radiant Photo Host makes the files. The editor doesn't open, and nothing is added to Capture One.

  1. In Capture One, select one or more variants and choose File > Publish > Radiant Photo.
  2. In the recipe, choose TIFF or JPEG. It starts as for editing: a 16-bit Adobe RGB (1998) TIFF.
  3. In the plug-in's own Radiant Photo tab, set Folder, where Radiant Photo writes the files. With none set, they go into a Radiant Photo folder in your Pictures folder. Name suffix sets the end of each file's name, -Radiant to start. On a Mac, Look sets what each photo gets: Perfect Look, the default, or A suggested Look for each photo, to check in Radiant Photo first (see Check a Look for each photo). The tab keeps your choice for next time. On Windows, there's no Look setting, and each photo gets its Perfect Look.
  4. Start the publish. Capture One shows Rendering in Radiant Photo (1 of 4), for example.

Each file keeps the recipe's format, color space and bit depth. One exception: a JPEG or another 8-bit file is never written in ProPhoto RGB. If the recipe asks for it, Radiant Photo writes that file in Adobe RGB (1998). A JPEG is written at quality 91. IMG_0001 is saved as IMG_0001-Radiant.jpg, or IMG_0001-Radiant-2.jpg when that name is taken.

At the end, Capture One reports Photos rendered by Radiant Photo: with the count. A photo that failed isn't in the folder. On a Mac, the report is a macOS notification with a Show button that opens the folder. It appears only when Capture One is allowed to send notifications, in System Settings > Notifications. If Capture One isn't listed there, the files are still in the folder.

On Windows, choose a folder on a drive letter. A network path that starts with \\ fails every photo.

Check a Look for each photo

On a Mac, with Look set to A suggested Look for each photo, to check in Radiant Photo first, nothing is rendered until you've checked each photo's Look.

  1. Start the publish. Radiant Photo Host shows a panel over Capture One, with every photo under Check each photo's Look. It counts the photos as it finds a Look for each one. Once it's done, you can change the Looks and accept them.
  2. Each photo shows with the Look it has now. A Look Radiant Photo picked reads Suggested.
  3. To change a photo's Look, click the photo, then choose another Look or No Look. The photo then shows with its new Look.
  4. Click Accept All. The panel closes, and the photos render: each gets its own Perfect Look, then the Look it has. A photo at No Look gets its Perfect Look alone. Click Cancel instead to render none.

A Look marked Not owned isn't one you own on this computer, so a photo given it fails and isn't in the folder. With many photos, scroll the panel. Each picture appears as its photo comes into view.

The suggestions come from PRISM, so they need Radiant Flow on this computer and PRISM Photo Score turned on. Without them, every photo starts at No Look, and you choose each Look yourself. See Browse with Radiant Flow.

If something goes wrong

You seeDo this
Radiant Photo is not installed on this Mac… (on Windows, …on this computer…)Install Radiant Photo, then try again.
Radiant Photo did not pick up the photos…Open Radiant Photo, then try again.
Radiant Photo sent no photos back: Radiant Photo is not activated on this computer…Open Radiant Photo and activate it, then try again.
Radiant Photo sent no photos back: macOS did not let Radiant Photo Host write into the folder… (Mac)Turn on Full Disk Access for Radiant Photo Host, then send the photos again. See Full Disk Access. The Host has its own entry, apart from Radiant Photo's.
Radiant Photo quit before it sent the photos back.Choose Image > Edit With > Radiant Photo again.
Radiant Raw is not installed or not activated on this Mac… (on Windows, …on this computer…)Install Radiant Raw, open it once and activate it, then try again.
Select one or more RAW photos, then try again.Check that the raw files are on a connected drive, then select them and try again. On Windows, send photos from one folder at a time. A raw file that shares its name with another raw file there, such as IMG_0001.CR3 and IMG_0001.DNG, can't be sent.
Capture One did not say which photos are selected… (Mac)Keep the photos selected and try again. If it comes back, allow Capture One to be controlled in System Settings > Privacy & Security > Automation.
Radiant Raw could not be opened…Open Radiant Raw, then choose Image > Edit With > Radiant Raw again.
Couldn't open the photos that were sent. Try sending them again. (in Radiant Raw)Radiant Raw can't open one of the raw files, so it opens none of them. Send the photos again without that file. Opening raw files, in the Radiant Raw manual, lists the files it opens.

Learn more